PST-3 Digital Power Supply Tester 20/24pin 4p 8p FDD SATA

PST-3 Digital Power Supply Tester 20/24pin 4p 8p FDD SATA

PST-2 Power Supply Tester 20/24pin 4p 6p 8p FDD HDD SATA

PST-2 Power Supply Tester 20/24pin 4p 6p 8p FDD HDD SATA
$9.90
Availability: In stock
SKU
ACTO01PST2

Features:

This product is a simple tester for switching power supply. It makes it easy to test the power supply output.  
1. Turn-on your power supply.
2. Plug-in your 24 pin power supply connector to mini tester
3. Check LED light it ON or OFF
(+5V. +12V. +3.3V. -5V. -12V. +5VBS. PG)
- If the power output is working, the LED will light and you will hear a sound
- If the power output fails, you won't see the LED light & no sound
4. Plug the HDD con, check +12V, +5V
5. Remove HDD, Plug p4(p6/p8)con, check +12V
6. Remove p4(p6/p8)con, plug FLOPPY con, check +12V, +5V
7. Remove Floppy con, plug SATA con, check +12V, +5V, +3.3V
8. Do not plug wrong position when you use P4 connector

Dimension : H * L *D : 64mm * 94mm * 18mm

Test for:

  • Tests 20-pin and 24-pin power supplies
     
  • Tests SATA power
     
  • Tests Pentium 4 power connector
     
  • Tests PCI-Express power connectors
     
  • Tests Xeon power connectors
     
  • Tests Floppy drive connectors
     
  • Tests standard 4-pin power supply connectors
     
  • Tests for +3.3V, -12V, PG, +5VSB, +12V, -5V, +5V outputs
     

Note:
The -5V DC output is took off from Intel ATX12V design guide since the 1.2 version.
1. The -5V usage was for last generation ISA slot. But the old ISA had been phased
out since 1993~1994.
2. Neither P3 nor P4 systems will need -5V output.  


Warning:
This product is designed only for power supply output tests. Do not leave it connected to the power supply
unattended. It generates heat and could possibly damage your power supply.

More Information
Brand Rexus
Manufacturer Part # ACTO01PST2
SKU ACTO01PST2
Write Your Own Review
You're reviewing:PST-2 Power Supply Tester 20/24pin 4p 6p 8p FDD HDD SATA